3D Laser Scanning Services in Ohio

The client was able to fabricate components offsite and plan a flawless installation based on our existing condition data and 3D model. Plus, GPRS' work was conducted entirely at night, mitigating any disruption to construction

Field verification to prefabricate ACM panels

Our client was installing ACM panels to the canopy of a newly constructed airport terminal. The construction plans did not match the existing conditions at the site. A deviation could cause a major issue. The installation process needed to be precisely planned to avoid rework.

The construction plans did not match the existing conditions at the site. The installation process needed to be precisely planned to avoid rework • The shape of the canopy was complicated and stood 65 feet in the air. The client needed field verification and a plan to expedite proper installation of the panels • Installers were working overhead in a lift; there was no room for trial and error Solution • The Project Manager conducted a site walk to devise a plan for the client • The canopy and curtain wall of the airport terminal were 3D laser scanned to capture precise as-built data and generate a 3D model and 2D drawings to facilitate ACM panel installation • 22" x 34" 2D CAD drawings were created with the panel layout for the client to take to the field. This allowed each panel to be labeled with a custom number, cut and shim points Benefits • Laser scanning obtained exact measurements for the client and took away any guesswork from this project • To circumvent the active construction site, the Project Manager scanned the site at night to eliminate movement and trades working • The client was able to fabricate components offsite and plan a flawless installation

All

3D Laser Scanning

GPRS provided 3D laser scanning and modeling services for a power plant in Ann Arbor, Michigan, which generates and processes four main services: steam, electricity, compressed air and domestic hot water. The objective was to as-built survey the 5-level building, basement, exterior facades, rooftop areas, electrical switch gear rooms, vaults and interstitial space below the control room. GPRS generated a 3D model in Bentley Microstation for the client’s use. The model included all civil, structural, electrical and mechanical features, including piping and conduits ½" in diameter and larger

GPRS provided 3D laser scanning and modeling services for a power plant in Ann Arbor, Michigan.

Location: Ann Arbor, Michigan Task: GPRS provided 3D laser scanning and modeling services for a power plant in Ann Arbor, Michigan, which generates and processes four main services: steam, electricity, compressed air and domestic hot water. The objective was to as-built survey the 5-level building, basement, exterior facades, rooftop areas, electrical switch gear rooms, vaults and interstitial space below the control room. GPRS generated a 3D model in Bentley Microstation for the client’s use. The model included all civil, structural, electrical and mechanical features, including piping and conduits ½" in diameter and larger. Challenge: The client needed to accurately document existing conditions. Due to the vast space and density of piping, it would have been much more difficult and time consuming to accurately depict the location of pipe runs, structural features and other details in the plant manually. It would have also been difficult and unsafe to capture overhead and structural features without the use of a lift. Solutions: Utilizing several scan technicians and multiple Leica laser scanners, including the Leica P-40, P-20, and C-10 ScanStation, GPRS was able to occupy existing plant benchmarks and orient the data to survey control. GPRS’ scan technicians captured full color panoramic photographs at each scan location with the on-board camera. GPRS completed over 1,200 individual scans for this project due to the density of the piping. Deliverables: GPRS’ team of in-house CAD technicians provided Microstation POD files, full-color TruViews and a Bentley Microstation V8i 3D model. Added Value: GPRS communicated directly with on-site personnel at the power plant and participated in daily work briefings to ensure compliance with plant safety protocol. Additionally, GPRS’ CAD technician visited the site with the scan technician, utilizing cutting edge methods to conduct in-field verification and quality assurance review of the 3D model on tablets in real time using both virtual reality and augmented reality methods.

All

3D Laser Scanning

In just one day on site, GPRS was able to capture the entire existing condition of the facility, even in dense pipe runs and hard-to-reach spaces, with 2-4mm accuracy to provide the client with an accurate 3D BIM model for planning, fabrication, and clash detection

An engineering firm needed to have existing conditions of a power plant documented and modeled to plan for renovations.

An engineering firm needed to have existing conditions of a power plant documented and modeled to plan for renovations.

Problem • The client needed to accurately document the existing conditions of the plant without interruptions to the power supply • Many of the pipe runs were dense and impossible to accurately measure by hand • The client required 2-4 mm accuracy of dense piping and pipe runs throughout the facility • The client needed to guarantee that installations complied with safety regulations Solution • In one day on site, GPRS' Project Manager used the Leica RTC360 laser scanner to capture 150 laser scans, documenting existing conditions of the facility • Many of the pipe runs were dense and impossible to accurately measure by hand • GPRS generated a 3D BIM model for use in CAD software, including all civil, structural, electrical, and mechanical features, piping, and conduit 1" and larger Benefits • Due to the vast space and density of the piping, it would have been much more difficult and time consuming to accurately depict the location of pipe runs, structural features, and other details in the plant manually • The point cloud data from laser scanning was used by CAD technicians to create an intelligent 3D BIM model for planning, fabrication and clash detection • Verified measurements and virtual planning guarantee installations will comply with safety regulations • Using virtual 3D models, the firm can plan and model future developments to manage the facility without having to re-enter the site

All

3D Laser Scanning