LiDAR Survey Dimensions of a 6-Story Building

The building was a 6-story building with windows on all four sides. The height alone of a 6-story building can create enough challenges when obtaining accurate measurements of window dimensions. This project, however, presented additional challenges. For example, the exterior of the building was not easily accessible by lift or scaffolding due to being located along a busy road with minimal right of way. Additionally, the other sides of the building also had obstacles which further limited access to the windows.

‍

By utilizing laser scanning, a non-contact measurement tool, GPRS was able to capture the accurate dimensions of the window openings safely from the ground, as well as from other safe locations. Window sills can sometimes be difficult to capture when scanning from the ground, but our scan technicians were able to set up on and scan from surrounding buildings and rooftops to ensure enough elevation to capture these features accurately for our client. And since laser scanning is not only safe and accurate, but also is extremely fast, the field work was limited to one day.

‍

Many times, in field measuring, there is an assumption made, after measuring several similar units, that others will likely be of the same dimensions. With laser scanning we can easily and accurately determine the dimensions of each opening individually. As is common with many older buildings, many of the openings of this building appeared to be the same size but, in fact, varied enough to cause potential problems. GPRS’ accurate measurements allowed the client to order dimensionally-correct windows for each specific opening, thus reducing any change orders for windows that did not fit perfectly the first time they were placed.

‍