3D Laser Scanning Services in Montana

GPRS was tasked with 3D laser scanning the existing conditions of this $417 million Wastewater Treatment Plant and producing an LOD 350 Revit model to plan for future expansion.

59 acres and 27 buildings were 3D laser scanned to provide complete as-built documentation of a Colorado Wastewater Treatment Plant. This client is the largest water reclamation provider in the Rocky Mountain West, serving 1.8 million people in a 715 square-mile area. GPRS was tasked with 3D laser scanning the existing conditions of this $417 million facility and producing an LOD 350 Revit model to assist with on-going operations and plan for future expansion.

GPRS was tasked with 3D laser scanning the existing conditions of this $417 million Wastewater Treatment Plant to produce an LOD 350 Revit model to assist with on-going operations and plan for future expansion.

THE BOTTOM LINE GPRS was tasked with 3D laser scanning the existing conditions of this $417 million Wastewater Treatment Plant and producing an LOD 350 Revit model to plan for future expansion. INDUSTRY Wastewater Treatment Plant SERVICE 3D Laser Scanning, Mapping & Modeling LOCATION Denver, Colorado PROJECT APPLICATION GPRS specializes in BIM and VDC management for wastewater treatment plants, utilizing 3D laser scanning technology to create detailed digital models. Task 59 acres and 27 buildings were 3D laser scanned to provide complete as-built documentation of a Colorado Wastewater Treatment Plant. This client is the largest water reclamation provider in the Rocky Mountain West, serving 1.8 million people in a 715 square-mile area. GPRS was tasked with 3D laser scanning the existing conditions of this $417 million facility and producing an LOD 350 Revit model to assist with on-going operations and plan for future expansion. PROBLEM The client needed the fastest way to document 59 acres and 27 buildings with the highest level of quality. Each building was unique and needed to be documented and modeled to plan for expansion, including pumping stations, sludge digester, thickener, tank reclamation, purification systems, aeration, primary and secondary settling, maintenance facilities and visitor center. The client had their own laser scanner, but did not have the manpower and resources to complete the project timely. Solution GPRS has a highly integrated and highly motivated team of laser scanning professionals. 59 acres of campus was 3D laser scanned in a 4-month period, sometimes with up to 10 Project Managers on site at one time. GPRS Project Managers captured 2,990 color scans and an in-house team of engineers produced an LOD 350 Revit model of the interior and exterior of 27 buildings of a 59 Acre Wastewater Treatment Plant including architectural and structural details, MEP and process piping ½" and above, valves, flanges, equipment detail and location, stairwells, railings, closets, restrooms and janitor rooms. The client also requested EdgeWise files, so the GPRS Mapping & Modeling Team modeled all piping, valves, flanges, ducts, conduit and framing and organized it in layers in accordance with the client’s naming conventions for location, plant process and material specifications. The client also used the BIM model to determine if the existing drawings reflected actual site conditions. Benefits 3D laser scanning enables clients to add, modify, validate and document their design digitally. 3D laser scanning allowed the plant to have a full scope of the existing conditions before renovations were made to the facility.

All

The Kennedy Space Center used GPRS 3D laser scanning services during recent upgrades to Launch Complex 39B. Our client was installing piping from the mechanical room under the launch pad up to the surface where they terminate, rerouting overhead piping through the mechanical room, as well as, removing and installing new equipment. GPRS delivered accurate and reliable as-built data for the Kennedy Space Center to plan upgrades and reroute piping.

The Kennedy Space Center used GPRS 3D laser scanning services during recent upgrades to Launch Complex 39B.

The Kennedy Space Center – Cape Canaveral, Florida 3D BIM Model to Upgrade Launch Complex 39B ‍ TASK: The Kennedy Space Center used GPRS 3D laser scanning services during recent upgrades to Launch Complex 39B. Our client was installing piping from the mechanical room under the launch pad up to the surface where they terminate, rerouting overhead piping through the mechanical room, as well as, removing and installing new equipment. GPRS delivered accurate and reliable as built data for the Kennedy Space Center to plan upgrades and reroute piping. ‍ CHALLENGE: The client needed fast and accurate as built documentation of the project areas so they could effectively plan upgrades and piping routes and note any clash points. Understanding exactly where the mechanical room equipment was located below the launch pad surface was crucial to this project and difficult to determine using a method other than 3D laser scanning. ‍ SOLUTION: The GPRS Mapping & Modeling Team delivered an LOD 300 3D BIM model of the structural and MEP details. Accurate information helped the client plan for the equipment and piping and determine the vertical penetration points. This saved time and money by prefabricating the piping offsite and minimizing rework from misaligned pipes and equipment.

All

3D Laser Scanning

A Revit model will expedite design changes and fabrication of equipment to increase production capacity at the manufacturing plant.

3D laser scan a manufacturing facility that is receiving upgrades to three of its lines to capture point cloud data and generate a 3D Revit Model.

A specialty compound manufacturer was upgrading three manufacturing lines at its plant as part of a larger capital improvement plan.

A specialty compound manufacturer was upgrading three manufacturing lines at its plant as part of a larger capital improvement plan.The facility was originally built in the 1980's and has expanded several times over the years.Multiple levels in the facility needed scanned at a very high level of detail, capturing structural, architectural, MEP and civil elements, along with a site plan.The following areas required 3D laser scanning services:On the ground production level, GPRS captured extruder areas for lines 1-3 and process equipment.On the mezzanine level, GPRS captured mixers for each extrusion line.On the second floor, GPRS captured blender areas for lines 1-3, process equipment, air handling equipment, and additional rooms.Outside, GPRS captured the tank farm and silo farm. GPRS provides 3D laser scanning services for facility upgrades and expansions, delivering 2-4mm accurate dimensions of building infrastructure: structural, mechanical, electrical and plumbing features; furnaces, equipment, conduit and piping. With an accurate, comprehensive data set, plant engineers can install new equipment and upgrade the three manufacturing lines. The facility was 3D laser scanned on the weekend to minimize interruption to the manufacturing lines.73 scans were performed in one day with the Leica P40 ScanStation and the Leica RTC360 laser scanner, acquiring very high detail of the plant.Colorized point cloud, TruView Viewer files, and a Revit model were delivered to the client. 3D laser scanning and a Revit model will expedite design changes and fabrication of equipment to increase production capacity.The investment of laser scanning will reduce the project timeline, minimize downtime and change orders -- providing cost savings for the client.This client is pioneering innovation in its industry -- upgrading the lines with updated extruders will increase capacity for long-term growth while minimizing stoppages, set-up times, and scrap material.

All

3D Laser Scanning