3D Laser Scanning Services in Hawaii

The deliverables provided will be an asset for years to come as they can be referenced for any future coring or drilling needs showing where everything embedded in the slab was prior to pouring.

The client was in active build of an eight-story apartment complex in Houston, Texas. Each floor had five to six concrete pours scheduled on specific dates over an 8-month period. GPRS 3D laser scanned each area to capture the existing conduit, post-tensioning, rebar plan and sleeves prior to the slab being poured. This allowed the client to check the existing conditions for any irregularities.

GPRS 3D laser scanned each area to capture the existing conduit, post-tensioning, rebar plan and sleeves prior to the slab being poured.

Location: Houston, Texas Task: The client was in active build of an eight-story apartment complex in Houston, Texas. Each floor had five to six concrete pours scheduled on specific dates over an 8-month period. GPRS 3D laser scanned each area to capture the existing conduit, post-tensioning, rebar plan and sleeves prior to the slab being poured. This allowed the client to check the existing conditions for any irregularities. Challenge: The client was on a strict timeline and did not want delays in construction. They needed to quickly and accurate ensure that everything was in its correct location prior to pouring the slab. The client needed a 3D laser scanning company who could quickly mobilize to the site, conduct efficient laser scanning and provide point cloud data aligned to the design drawings within 24-48 hours. Solution: GPRS worked closely with the client. The scan technician mobilized to the site 1-2 times a week for 8 months and quickly captured the data without stalling the construction process. The scan technician set up the laser scanner at multiple locations around each slab and captured the data without disturbing the active construction site. GPRS’ team of in-house engineers quickly provided the point cloud alignment. The sub-centimeter point cloud data allowed the client to review the site conditions and make changes prior to the scheduled pour and without ever having to leave the office. Deliverable: GPRS’ Project Manager laser scanned each area and provided a colorized point cloud to the client. The colorized point cloud allowed the client to see color imagery, stitched over the point cloud to assess the area for misplaced sleeves, conduits and post-tension runs. This data was also aligned to the existing building plans to quickly find any issues. Added Value: The client relayed that GPRS saved them thousands of the dollars with just the first mobilization. They identified issues with the sleeve alignment from the home office and had them corrected prior to the slab being poured. Finding out that the sleeves were not in the correct location, even the day after the pour, would have cost the general contractor tens of thousands of dollars in coring costs alone. And if this problem would not have been discovered until framing and other elements went up could have cost exponentially more. GPRS’ nationwide team of scan technicians that can mobilize to any site quickly. Our experience and long-term client commitment make us a great partner for your 3D laser scanning needs. 3D high-definition surveying has proven to be a quick, accurate, and versatile tool for architects, engineers, BIM managers, general contractors, and construction managers. It is ideal for adaptive reuse or renovation projects. In this case, GPRS provided the client with invaluable information that allowed them to assess the site from their office before the concrete slab was poured. The deliverables provided will be an asset for years to come as they can be referenced for any future coring or drilling needs showing where everything embedded in the slab was prior to pouring. From skyscrapers to sewer lines, GPRS Intelligently Visualizes The Built World® to keep your projects on time, on budget, and safe. What can we help you visualize?

All

3D Laser Scanning

The use of laser scan technology has resulted in accurate and efficient data collection, precise as-built documentation, cost savings due to improved design accuracy, and improved project visualization and collaboration.

A pharmaceutical company was installing some new equipment in various areas of the facility. Existing machinery was being removed, new machinery was being installed and MEP piping was being re-routed throughout the area. GPRS provided laser scanning services to collect point cloud data on four levels and generate a 3D model for the client. Before starting renovations of this existing facility, the client desired to document existing conditions to plan layout and process flow upgrades.

The use of laser scan technology has resulted in accurate and efficient data collection, true as built documentation, cost savings due to improved design accuracy, and improved project visualization and collaboration.

Location: Social Circle, GA Project Manager Insight: “The cost of laser scanning and modeling should easily be offset by the cost savings from reduced re-work during the facility renovations.” Andy Foshee, TruePoint Southeast Regional Manager. Task: A pharmaceutical company was installing some new equipment in various areas of the facility. Existing machinery was being removed, new machinery was being installed and MEP piping was being re-routed throughout the area. TruePoint provided laser scanning services to collect point cloud data on four levels and generate a 3D model for the client. Before starting renovations of this existing facility, the client desired to document existing conditions and plan layout and process flow upgrades. Challenge: Upgrading existing pharmaceutical manufacturing sites can be challenging. The space available is restricted and bringing in new equipment is sometimes tricky. Our client needed to make several tie-ins and requested a Revit model for planning. Solution: Using the Leica P50 ScanStation, TruePoint captured structural features, MEP piping and equipment ½ inch and above. An LOD 300 Revit model was requested to ensure more accurate, efficient and cost-effective execution of the project. With planning, the client was able to install the new machinery and re-route piping without any field rework. This also resulted in reduced downtime and significant savings by returning the facility to production quickly. Deliverable: TruePoint delivered a point cloud .rcp file, JetStream Viewer file and an LOD 300 Revit model to the client. TruePoint's team of CAD technicians modeled the following details for the client: Pipe - 72,000 linear feet Conduit - 75,000 linear feet Duct - 11,000 linear feet Pipe modeled down to 1/2 inch in diameter. Added Value: The use of laser scan technology has resulted in accurate and efficient data collection, true as built documentation, cost savings due to improved design accuracy, and improved project visualization and collaboration. For 3D laser scanning services in Atlanta, GA call 404-665-7252 or email atlanta@truepointscanning.com. TruePoint is a leader in 3D laser scanning and scan to BIM services. Our experienced professionals are dedicated to delivering the highest quality point cloud data, 2D drawings and 3D models, using state-of-the-art equipment, technology and processes. Keywords: laser scanning to complete pharmaceutical plant upgrades, laser scanning for plant documentation, Revit model for design planning, laser scanning to re-route piping, scan to BIM MEP.

All

3D Laser Scanning

GPRS provided 3D laser scanning services for six parking lot structures at the Dallas Fort Worth International Airport, ranging from 500 to 2,500 square feet in plan area. The client wanted accurate dimensional information to prefabricate replacement canopies for each of the structures.

GPRS provided 3D laser scanning services for six parking lot structures at the Dallas Fort Worth International Airport, ranging from 500 to 2,500 square feet in plan area

Dallas Fort Worth International Airport – DFW Airport, Texas Prefabrication of Canopies for Parking Lot Structures ‍ TASK: GPRS provided 3D laser scanning services for six parking lot structures at the Dallas Fort Worth International Airport, ranging from 500 to 2,500 square feet in plan area. The client wanted accurate dimensional information to prefabricate replacement canopies for each of the structures. ‍ CHALLENGE: The client needed accurate information to design replacement fabric panels, including the location of the attachment plates and fasteners. They requested a quick turnaround on this project, GPRS expedited deliverables within 15 working days of the purchase order. ‍ SOLUTION: Dimensions were quickly verified in these high traffic areas of the airport with a Leica laser scanner. GPRS’ Mapping & Modeling Team created an LOD 200 Revit 3D model including basic structural elements, such as exposed structural columns and joists, grade and canopy. With the 3D model, the following details could be used to expedite prefabrication and installation - elevations, plan dimensions, radii of rolled elements, plus locations and dimensions of all attachment hardware.

All

3D Laser Scanning