3D Laser Scanning Services in California

The client was able to fabricate components offsite and plan a flawless installation based on our existing condition data and 3D model. Plus, GPRS' work was conducted entirely at night, mitigating any disruption to construction

Field verification to prefabricate ACM panels

Our client was installing ACM panels to the canopy of a newly constructed airport terminal. The construction plans did not match the existing conditions at the site. A deviation could cause a major issue. The installation process needed to be precisely planned to avoid rework.

The construction plans did not match the existing conditions at the site. The installation process needed to be precisely planned to avoid rework • The shape of the canopy was complicated and stood 65 feet in the air. The client needed field verification and a plan to expedite proper installation of the panels • Installers were working overhead in a lift; there was no room for trial and error Solution • The Project Manager conducted a site walk to devise a plan for the client • The canopy and curtain wall of the airport terminal were 3D laser scanned to capture precise as-built data and generate a 3D model and 2D drawings to facilitate ACM panel installation • 22" x 34" 2D CAD drawings were created with the panel layout for the client to take to the field. This allowed each panel to be labeled with a custom number, cut and shim points Benefits • Laser scanning obtained exact measurements for the client and took away any guesswork from this project • To circumvent the active construction site, the Project Manager scanned the site at night to eliminate movement and trades working • The client was able to fabricate components offsite and plan a flawless installation

All

3D Laser Scanning

Raw point cloud data provided an engineering firm in California the accurate measurements they needed to design and plan the expansion of a water treatment facility in Texas thanks to 3D laser scanning

Capture accurate existing conditions and provide raw as-built, point cloud data for the expansion of a water treatment plant

An engineering firm was generating construction drawings to expand an existing water treatment plant. The firm required accurate field conditions in raw point cloud data (.rcp files and related supporting files) to create new layouts for construction.

No as-built drawings existed for the water treatment plant. Accurate existing conditions were needed to plan for the facility expansion • Exact dimensions were required to plan modifications and fabricate pipe • The project's engineering firm was located in California; the water treatment plant was located in Texas. They needed accurate information available in a digital platform to begin design planning Solution • Using a Leica Scan Station, a GPRS Project Manager completed 40 laser scans of the building to capture architectural, structural, and MEP features • The client received a colorized point cloud in ReCap (.rcp files and related supporting files) and TruView files that allowed the engineering firm and the plant to coordinate off-site planning and prefabrication for the expansion Benefits Laser scanning is an extremely efficient and accurate way to gather data necessary to create construction drawings of a building or space. • 3D laser scanning eliminated the firm's travel to the Water Treatment Plant. In one day on site, enough scans were taken to create a complete colorized point cloud of the space. • 3D laser scan data provided the Engineering Firm critical tie points on tanks and lines, information that was crucial to the expansion.

All

3D Laser Scanning

In just one day on site, GPRS was able to capture the entire existing condition of the facility, even in dense pipe runs and hard-to-reach spaces, with 2-4mm accuracy to provide the client with an accurate 3D BIM model for planning, fabrication, and clash detection

An engineering firm needed to have existing conditions of a power plant documented and modeled to plan for renovations.

An engineering firm needed to have existing conditions of a power plant documented and modeled to plan for renovations.

Problem • The client needed to accurately document the existing conditions of the plant without interruptions to the power supply • Many of the pipe runs were dense and impossible to accurately measure by hand • The client required 2-4 mm accuracy of dense piping and pipe runs throughout the facility • The client needed to guarantee that installations complied with safety regulations Solution • In one day on site, GPRS' Project Manager used the Leica RTC360 laser scanner to capture 150 laser scans, documenting existing conditions of the facility • Many of the pipe runs were dense and impossible to accurately measure by hand • GPRS generated a 3D BIM model for use in CAD software, including all civil, structural, electrical, and mechanical features, piping, and conduit 1" and larger Benefits • Due to the vast space and density of the piping, it would have been much more difficult and time consuming to accurately depict the location of pipe runs, structural features, and other details in the plant manually • The point cloud data from laser scanning was used by CAD technicians to create an intelligent 3D BIM model for planning, fabrication and clash detection • Verified measurements and virtual planning guarantee installations will comply with safety regulations • Using virtual 3D models, the firm can plan and model future developments to manage the facility without having to re-enter the site

All

3D Laser Scanning